SKU# 7494388

SIMPSON RAFTER TIE GALV REVERSIBLE

UPC Code: 044315302008 SIMPSON H3 RAFTER TIE GALV $0.79/EA

Product Overview

The H3 single-sided hurricane tie is designed to resist moderate loads at the rafter/truss to-top-plate connection. As part of a continuous load path, the H3 resists both lateral and uplift loads. H3 ties are available in left and right-hand models and can be installed in pairs.

Fastening Method: Nail
Finish: Galvanized
Length: 4-5/8
Material: Steel
Material Gauge: 18 ga
Resists: Corrosion
Width: 1-9/16

Key Features

Provides a connection between the rafter or truss and the wall of the structure that helps resist wind and seismic forces
Approved for installation with load-rated Strong-Drive® SD connector screws
Use also for a variety of connections where one member crosses another
Galvanized (G90) for extra corrosion resistance
Hurricane ties do not replace solid blocking
When installing ties on plated trusses (on the side opposite the truss plate) do not fasten through the truss plate from behind

Pack Quantity

The quantity that makes up a standard package.

You must order in units of this quantity.

Items are sold in Gross and Pieces.

Example: Package quantity

.3333 gross enter .3333
10 gross enter 10 or 20, 30 etc.
72 pieces enter 72 or 144, 216 etc.

Please note: 1 gross = 144 pieces.

Pack Quantity	Pieces
0.0208	3
0.0417	6
0.0555	8
0.0625	9
0.0694	10
0.0833	12
0.1041	15
0.1111	16
0.1250	18
0.1389	20
0.1667	24
0.2083	30
0.2222	32
0.2500	36
0.2778	40
0.3333	48
0.4166	60
0.5000	72
0.6667	96
0.7500	108
1.3333	192
1.5000	216
1.6667	240