Home > MOBILE HOME ACCESSORIES > Mobile Home Window / Door Hardware
We found 21 results matching your criteria.
Sort By:
1
American Hardware WP-8884C Crank Handle Awning Window Operator American Hardware WP-8889C Crank Handle Awning Window Operator American Hardware WP-8831C Storm Window Clip
Mill finish. Attaches to awning window operator for opening and closing. 5/16" spline diameter. Screws included. Mill finish. Attaches to awning window operator for opening and closing. 5/16" spline diameter. Screws included. Holds storm window or screen in place. Includes Phillips head screws. 21/32" x 1/8". Size: 15/16" x 3/8".
American Hardware WP-8885C Crank Handle Awning Window Operator American Hardware WP-8886C Crank Handle Awning Window Operator American Hardware WP-8887C Crank Handle Awning Window Operator
Mill finish. Attaches to awning window operator for opening and closing. 5/16" spline diameter. Screws included. Mill finish. Attaches to awning window operator for opening and closing. 5/16" spline diameter. Screws included. Mill finish. Attaches to awning window operator for opening and closing. 5/16" spline diameter. Screws included.
American Hardware WP-8888C Crank Handle Awning Window Operator American Hardware D-121C Door Catch American Hardware WP-0624C Window Torque Bar Bearing
Mill finish. Attaches to awning window operator for opening and closing. 5/16" spline diameter. Screws included. Attaches to 1/2" round bar and window sill to allow movement of window. 1" center to center holes. Size: 1-1/2" height x 5/8" width x 1-11/16" depth.
American Hardware WP-8830C Storm Window Clip American Hardware WP-8867C Awning Window Operator American Hardware WP-8868C Awning Window Operator
Holds storm window or screen in place. Includes Phillips head screws 21/32" x 1/8". Size: 7/8" x 1/2". Attaches to window for opening and closing. 5/16" x 7/8"L spline, attaches to 1/2" round bar, 3/16" hub projection. Made of die cast zinc (Zamac 3) with mill finish. Attaches to window for opening and closing. 5/16" x 13/16"L spline, attaches to 1/2" round bar, 3/8" hub projection. Made of die cast zinc (Zamac 3), mil finish.
American Hardware WP-8869C Awning Window Operator American Hardware D-628C Drive-In Latch
Attaches to window for opening and closing. 5/16" x 13/16"L spline, attaches to 1/2" round bar, 3/16" hub projection. Made of die cast zinc (Zamac 3) mil finish. Drive-in latch. 2-3/8" setback. Used on kwik-set interior lockset. For use on interior hall or closet mobile home doors where a simple latch is all that is required. Both bell-shaped knobs always free; no locking mechanism. 7/8" Edge Bore. DOOR PREP: 2-1/8" Cross Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and
American Hardware Mobile Home D-601B Interior Door Lockset
For use on interior hall or closet mobile home doors where a simple latch is all that is required. Both bell-shaped knobs always free; no locking mechanism. 7/8" Edge Bore. DOOR PREP: 2-1/8" Cross Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" standard and For use on interior bedroom and bathroom mobile home doors. Both bell-shaped knobs locked or unlocked by turnbutton inside. Outside knob unlocked by emergency key. 7/8" Edge Bore. DOOR PREP: 2-1/8" Cross Bore, 1" x 2-1/4" Latch Face. BACKSET: 2-3/8" stand For hall and closet doors where no locking is required; both knobs always free. 2-3/8" setback. Fits doors 1-3/16" to 2" thickness.
American Hardware Mobile Home D-099B 4-Way Entrance Lockset American Hardware Mobile Home D-113B Single Cylinder Entrance Deadbolt American Hardware Mobile Home D-083B Single Cylinder Entrance Deadbolt
Imported 4 way universal entry lock. Standard or drive-in latch. Fits doors 1-3/8" to 1-5/8" thickness. 2-3/8" or 2-3/4" setback. Carded. Standard or drive-in latch. Fits doors 1-3/8" to 1-5/8" thickness. 2-3/8" setback. Key to thumb. Bagged. Standard or drive-in latch. Key to thumb. Fits doors 1-3/8" to 1-5/8" thickness. 2-3/8" setback. Bagged.
   
 
1