Home > IN-STORE HARDWARE > Heating & Cooling
We found 29 results matching your criteria.
Sort By:
1
DAMPER STOVEPIPE 6IN CAST IRON Imperial BM0047 Stove Pipe Starter Joint Lambro 302L Flexible Semi-Rigid Duct Pipe
Imperial Stovepipe Damper, Suitable For Use With: Flue Pipe, 6 In Dia, Cast Iron, Black Imperial Joint Connector, Crimped End, 6 in Outside Diameter, 6 in Length, 24 ga Thickness, Black Lambro Duct Pipe, Flexible, Semi-Rigid, 4 in Nominal, 8 ft Length, Compression End, Aluminum, Without Clamps
Imperial BM0094 Trim Stove Pipe Collar SEALANT SILICONE 10.3OZ CLEAR Selkirk 206810 Storm Collar
Ecco Stove Pipe Collar, 6 in Nominal, 24 ga Thickness, Matte, Black, Trim Coller, Use With Stoves That Have An Under-Sized Flue Collar Imperial Silicone Sealant, High Temperature, 10.3 oz Capacity, Cartridge, 32 g/l VOC, Paste, Clear, Acetic Acid/Thixotropic Odor/Scent, Media: Carbon Dioxide, Dry Chemical, Water Fog, Foam and Water, Composition: Amorphous Silica, Methyltriacetoxysilane, Ethyltriacetoxysilane, Octamethylcyclotetrasiloxane, Flammability Rating: 1, 1.03 Specific Gravity, Applicable Materials: Metal, Glass, Wood and Plastic, 450 Deg F, Standards: SOR/88-555, 29 CFR 1910.1200, For Sealing Fireplace Inserts, Solar Panel Repairs, Stoves, Flashings and Anywhere a Black or Translucent Permanent Elastic Seal is Needed Selkirk Storm Collar, 6 in Nominal, 8 in Inside Diameter, 5-1/2 in Length, For Round Chimney Pipe
Imperial BM0062 Stove Pipe Increaser Lambro 414 Flexible Laminated Dryer Transition Duct Imperial BM0014 Adjustable Stove Pipe Elbow
Ecco Flue Pipe Increaser, 6 x 8 in Nominal, Crimped End, 24 ga Thickness, Matte, Black Lambro Dryer Transition Duct, Flexible, Laminated, 4 in Outside Diameter, 25 ft Length, Aluminum, UL Listed, For Applications where Rigid Metal Pipe is Not Required Imperial Stove Pipe Elbow, Adjustable, 6 in Nominal, 0 - 90 Deg, 24 ga Thickness, Steel, Matte, Black, Used to Connect Two Lengths Of Flue Pipe Together
Imperial BM0023 1-Piece Corrugated Stove Pipe Elbow Selkirk A 206825 Adjustable Roof Flashing Sure-Temp 206012 Type HT Insulated Chimney Pipe
Imperial Stove Pipe Elbow, 1-Piece, Corrugated, 6 in Nominal, 24 ga Thickness, Black Selkirk Roof Flashing, Adjustable, Series: A, 24 in Width, 28-1/2 in Length, Stainless Steel, Used with 6 in Pipe Diameter Sure-Temp Chimney Pipe, Type HT, Insulated, 6 in Nominal, 8 in Outside Diameter, 12 in Length, 1 in Thickness, 1000 deg F, Stainless Steel, UL Listed
Sure-Temp 206800 Round Type HT Chimney Topper AmeriVent 6HS-12 Triple Wall Insulated Chimney Pipe Sure-Temp 206018 Type HT Insulated Chimney Pipe
Sure-Temp Chimney Topper, Round, Type HT, 6 in Diameter, 12 X 5-1/2 in AmeriVent Chimney Pipe, Triple Wall, Insulated, 6 in Nominal, 9 in Outside Diameter, 12 in Length, Snap Lock Joint End, 2100 deg F, Stainless Steel, Galvanized, UL 103 HT Sure-Temp Chimney Pipe, Type HT, Insulated, 6 in Nominal, 8 in Outside Diameter, 18 in Length, 1 in Thickness, 1000 deg F, Stainless Steel, UL Listed
American Metal 6HS-RCS Insulated Chimney Cap AmeriVent 6HS-24 Triple Wall Insulated Chimney Pipe Imperial BM0111 Stove Pipe
American Metal Chimney Cap, Insulated, 36 in Length, Round Shape, 3-Wall Mounting, 6 in ID X 9 in OD Diameter, Stainless Steel, Galvanized AmeriVent Chimney Pipe, Triple Wall, Insulated, 6 in Nominal, 9 in Outside Diameter, 24 in Length, Snap Lock Joint End, 2100 deg F, Stainless Steel, Galvanized, UL 103 HT Imperial Stove Pipe, Series: BM, 6 in Nominal Size, 24 in Length, 24 ga Thickness, Snap-Lock, 1200 deg F, Steel, Matte, Black, For Connect Woodstove to Entrance of Chimney
AmeriVent 6HS-36 Triple Wall Insulated Chimney Pipe Ventamatic BF24TF Direct Drive Barrel Fan Sure-Temp 206036 Type HT Insulated Chimney Pipe
Ventamatic BF24TF Direct Drive Barrel Fan, 120 V, 2 Speed
Our Price: $129.99
Dirt Cheap Price! $104.99
Savings: $25.00
AmeriVent Chimney Pipe, Triple Wall, Insulated, 6 in Nominal, 9 in Outside Diameter, 36 in Length, Snap Lock Joint End, 2100 deg F, Stainless Steel, Galvanized, UL 103 HT Ventamatic Barrel Fan, Direct Drive, Ventamatic, 4000 cfm, 1/4 hp Power, 120 V, 3.28 A, 60 Hz, 1050 - 850 rpm, 2 Speeds, 4 Blades, Steel Guard, 29 in Overall Height, 29 in Overall Width, 11 in Overall Depth, Orange/Peache, UL Listed, 24 in Fan Diameter, Standalone Mount, For Industrial, Commercial and Residential use Sure-Temp Chimney Pipe, Type HT, Insulated, 6 in Nominal, 8 in Outside Diameter, 36 in Length, 1 in Thickness, 1000 deg F, Stainless Steel, UL Listed
American Metal 6HS-RKS 3 Wall Round Fuel Kit HY-C L3242WW-3 Lined Stove Board with Rounded Corners Sure-Temp 206148 Type HT Insulated Chimney Pipe
American Metal Fuel Kit, 3 Wall Round, 6 in, 5 Pieces, Includes: (1) Stainless Steel Cap, (1) Standard Flashing, (1) Storm Collar, (1) Ceiling Support and (1) Single Wall Adapter, Stainless Steel, Galvanized HY-C Stove Board, Lined, 32 in Width, 42 in Length, 3/8 in Thickness, Steel, Walnut Woodgrain, With Rounded Corners and Fiberboard Lined, For Kerosene, Gas and Electric Heaters Sure-Temp Chimney Pipe, Type HT, Insulated, 6 in Nominal, 8 in Outside Diameter, 48 in Length, 1 in Thickness, 1000 deg F, Stainless Steel, UL Listed
Sure-Temp 206621 Pitched Ceiling Support Kit Sure-Temp 206620 Flat Ceiling Support Kit Mr Heater F270270 Forced Air Heater
Sure-Temp Ceiling Support Kit, Pitched, 6 in, Stainless Steel, Includes: (1) Round Top, (1) Storm Collar, (1) Flashing, Attic Insulation Shield, (1) Finish Support Package and Smoke Pipe Adapter With Coupler, UL Listed, Class A, Used on a Cathedral or Pitched Ceiling Common To A-Frame Construction Sure-Temp Ceiling Support Kit, Flat, 6 in, Stainless Steel, Includes: (1) Round Top, (1) Storm Collar, (1) Flashing, Attic Insulation Shield, (1) Finish Support Package and Smoke Pipe Adapter With Coupler, UL Listed, Class A Mr Heater Forced Air Heater, Model: MH75KTR, 75000 BTU, 1750 sq-ft Coverage, 115 VAC, 3 A, Kerosene Fuel, 6 gal Fuel Tank, 11 hr Operating Time, CSA Certified, For Construction Sites, Agricultural Buildings, Industrial Workspaces
Sure-Temp 206622 Thru-the-Wall Support Kit American Metal 6HS-TWK 3-Wall Chimney Installation Kit
Sure-Temp Thru-the-Wall Support Kit, 6 in, Stainless Steel, Includes: (1) Round Top, (1) Wall Band, (1) Insulated Tee, (1) Wall Support Kit, (1) Insulated Wall Thimble, (1) 12 in Pipe Section, (1) Smoke Pipe Adapter and (1) Finish Collar, UL Listed, Class A American Metal Chimney Installation Kit, 3-Wall, 6 in, Includes: (1) Stainless Steel Cap, (1) Standard Flashing, (1) Storm Collar, (1) Ceiling Support and (1) Single Wall Adaptor, Suitable For Use With: Venting Appliances Through a Side Wall
   
 
1